Disposable Haemodialysers(Low Flux) for the hemodialysis treatment

Product Detail

Haemodialysers are designed for the hemodialysis treatment of acute and chronic renal failure and for single use. According to the semi-permeable membrane principle, it can introduce patient’s blood and dialyzate at the same time, both flow in the opposite direction in the both sides of dialysis membrane. With the aid of gradient of the solute, osmotic pressure and hydraulic pressure, The Disposable Haemodialyser can remove toxin and additional water in the body, and at the same time, supply with the necessary material from the dialyzate and maintain electrolyte and acid-base balanced in the blood.

Dialysis treatment connection diagram:

Technical Data:

Main Parts:
Material:

Part	Materials	Contact Blood or not
Protective cap	Polypropylene	NO
Cover	Polycarbonate	YES
Housing	Polycarbonate	YES
Dialysis membrane	PES membrane	YES
Sealant	PU	YES
O-ring	Silicone Ruber	YES

Declaration: all the main materials are non-toxic,meet the requirement of ISO10993.

Product performance: This dialyzer has reliable performance, which can be used for hemodialysis. The basic parameters of product performance and laboratory date of the series will be provided as follows for reference.Note: The laboratory date of this dialyzer was measured according to the standards ISO8637Table 1 Basic parameters of Product Performance

Model	A-40	A-60	A-80	A-200
Sterilization Way	Gamma ray	Gamma ray	Gamma ray	Gamma ray
Effective membrane area(m²)	1.4	1.6	1.8	2.0
Maximum TMP(mmHg)	500	500	500	500
Inner diameter of membrane(μm±15)	200	200	200	200
Inner diameter of housing(mm)	38.5	38.5	42.5	42.5
Ultrafiltration Coefficient(ml/h. mmHg) (QB=200ml/min, TMP=50mmHg)	18	20	22	25
Pressure drop of blood compartment(mmHg) Q_B=200ml/min	≤50	≤45	≤40	≤40
Pressure drop of blood compartment(mmHg) Q_B=300ml/min	≤65	≤60	≤55	≤50
Pressure drop of blood compartment(mmHg) Q_B=400ml/min	≤90	≤85	≤80	≤75
Pressure drop of dialyzate compartment(mmHg) Q_D=500ml/min	≤35	≤40	≤45	≤45
Volume of the blood compartment(ml)	75±5	85±5	95±5	105±5

Table 2 Clearance

Model		A-40	A-60	A-80	A-200
Test Condition :Q_D=500ml/min,temperature:37℃±1℃, Q_F=10ml/min
Clearance (ml/min) Q_B=200ml/min	Urea	183	185	187	192
	Creatinine	172	175	180	185
	Phosphate	142	147	160	165
	Vitamin B₁₂	91	95	103	114
Clearance (ml/min) Q_B=300ml/min	Urea	232	240	247	252
	Creatinine	210	219	227	236
	Phosphate	171	189	193	199
	Vitamin B₁₂	105	109	123	130
Clearance (ml/min) Q_B=400ml/min	Urea	266	274	282	295
	Creatinine	232	245	259	268
	Phosphate	200	221	232	245
	Vitamin B₁₂	119	124	137	146

Remark: The tolerance of the clearance date is ±10%.

Specifications:

Model	A-40	A-60	A-80	A-200
Effective membrane area(m²)	1.4	1.6	1.8	2.0

Packaging

Single units: Piamater paper bag.

	Number of pieces	Dimensions	G.W.	N.W.
Shipping Carton	24 Pcs	465330345mm	7.5Kg	5.5Kg

Sterilization

Sterilized using irradiation

Storage

Shelf life of 3 years.

• The lot number and expiry date are printed on the label put on the product.

• Please store it in a well-ventilated indoor place with storage temperature of 0℃~40℃,with relative humidity no more than 80% and without corrosive gas

• Please avoid crash and exposure to the rain, snow, and direct sunlight during transportation.

• Do not store it in a warehouse together with chemicals and humid articles.

Precautions of use

Do not use if sterile packaging is damaged or opened.

For single use only.

Dispose of safely after single use to avoid risk of infection.

Quality tests:

Structural tests, Biological tests, Chemical tests.

Product Tags

Dialyzer